Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Packs/Racks/Baskets

$30.99 - $49.99
The Wald 582 sets the standard for ingenuity when it comes to rear baskets. Mounting to the side of many rear racks, this nimble basket is the perfect size for packing 1-2 bags of groceries while balancing your load. When not in use, the base of the basket pivots up allowing the side walls to collapse. A simple clamp at the top keeps the basket out of your way when not in use. - Made in U.S.A. (Maysville, KY) - Baskets clamp to most rear racks up to 1/2" diameter - When not in use the base of the basket pivots up allowing the side walls to collapse making the collapsed basket 1" thick - A simple clamp at the top keeps the basket out of your way when collapsed - Extended basket is 12 3/4" front to back x 7 1/4" side to side x 8 1/2" deep - 582 Baskets have a Zinc Plated Finish; 582BL and 582WH Baskets have a Powder Coat Finish - Complete basket weighs 2.8 lbs.
$10.00 - $15.00
Common on European utility bikes, a front wheel stabilizer makes loading front racks simpler. It is a spring connecting the fork to the down tube. It adds a subtle self centering action to the front wheel, making loading and unloading of a bike with a basket, or say, our Porteur Rack much easier. The spring also offers some resistance to steering, so it counteracts deflections from hitting potholes and road debris. - Mounts to the back of the fork crown via brake bolt or through bolt - Fork crown mount diameter is made to fit an M6 bolt - common on nutted calipers - Use Sheldon's Fender Nuts to work with recessed brake bolts - Rust resistant and includes all required brackets and hardware - Available for Small (31.8mm and smaller) and Large (38-62mm) sized downtubes
$89.95
A full featured medium capacity handlebar bag with a QuickClick mount and shoulder strap that makes it easy to take it with you. Fully padded, divided main compartment plus front zip and two side pockets keep gear organized. Perfect for extended touring, day trips and commuting. Rain cover included. - Clear map cover - Shoulder strap - Carry handle - Rain cover - 3M reflective strip, safety light clip (3M is a registered trademark of 3M Company) - Bag Attachment: QuickClick handlebar mount - Fits 25.4, 28.6 & 31.8mm handlebars - Compartments: Divided main compartment, front zip pocket, two side zip pockets, clear map pocket - Material: 1800 / 840 denier nylon - Max Load: 5kg / 11lb - Fully padded - Size: 25.5 x 23 x 18cm / 10" x 9.1" x 7.1" - Weight: 670g / 1.48lb
$60.00
Direct replacement item for Surly racks.
$100.00
These rear rack-mounted adapters provide simple and secure mounting points for panniers like the Coolcave. The low mounting position opens the top rack platform for other accessories like the Rack Customization Kit or MIK adapter. *Third-party panniers not tested for guaranteed compatibility - Designed for frictionless compatibility with the Globe Haul ST and up to 2 pairs on Haul LT* - *Not compatible with Globe Pegs due to shared mounting location. - Accepts most standard bicycle panniers, such as the Specialized Coolcave. - Includes two pannier adapters (one for each side of the rack) and all required hardware. - 8kg (18lb) load capacity per side. - Additional tools required for rear installation (not included).
$25.00
So you like to keep your rig running minimalist but practical? Maybe you prefer to tape a spare tube and CO2 to your frame to keep the profile and weight low? The Bandit is the best of both worlds in terms of simplicity and utility for mountain riders. Its compact form bolts under your SWAT-compatible saddle and features a simple Velcro strap with individual compartments for tube, CO2, and tire lever. One rip of the strap and you’re in, with easy to access everything you need to fix a flat in the middle of a race, when time is of the essence. - Tough, lightweight, water-resistant Velcro strap. - Uniquely designed to bolt directly under a saddle with SWAT-compatible mounts. - Individual compartments for a CO2 valve head, mountain tube, two-sided tire lever (included), and a 25g CO2 cartridge (not included) for compact and secure storage. - Tube, CO2 cartridge, and nozzle not included.
$90.00
- 15kg carrying capacity. - Folding design allows it to fold down to size of a pizza box. - Lightweight aluminum, 13mm rails. - Can carry any side pannier with hooks that fit 13mm rails or larger. - Additional platform on top allows for an extra bag.
$70.00
20-liter waterproof pack bag designed specifically for the Specialized/Fjällräven Cool Cave pannier (art.no 23234). Made from waterproof recycled nylon that, together with the roll-top closure and taped seams, reliably protects your gear in wet weather. Valve to release air so contents can be compressed after the bag is closed. Part of the Specialized/Fjällräven series for urban rides and bikepacking adventures. - Roll-top closure and taped seams keep water out. - Lightweight, waterproof fabric in 100% recycled nylon 210D. - Air-release valve for easy compression. - Volume- 20 L - 100% polyamide 210D
$129.99 - $130.00 $130.00 On Sale
Bike to hike and back again has never been easier. Based on the iconic Fjallraven Verdag backpack, the Cave Pack has been shaped to nestle into the Coolcave like an arctic fox in its den. Lift the pack out of the Coolcave and sling it on your back using the padded shoulder straps. Equipped with a padded laptop compartment and large and small pockets, the Specialized/Fjällräven Cave Pack organizes and protects your most important belongings. - 20L capacity. - Easy-access pocket. - Fully padded laptop compartment. - Large front pocket. - Easy-carry handles. - Compatible with Coolcave pannier.
$79.99 - $80.00 $80.00 On Sale
Whether it’s a picnic in the park or an epic, multi-day ride in the mountains, we believe good storage equals good adventuring. Enter our versatile and tough Coolcave pannier. A 19-liter open pannier in rigid plastic, our Coolcave is perfect for carrying everyday essentials, purchases, or camping gear on bike commutes or trips in the countryside. Easy to clip on and off so you can take the pannier and its contents with you. Adjustable KlickFix mountings allow for secure attachment on most bike racks. Openings for gear straps and compatible with the Cave Lid Pack (art.no. 23230). Part of the Specialized/Fjällräven Exchange series for urban rides and bikepacking adventures. - 19L cargo capacity. - KlickFix mounting system. - Injection-molded plastic, made with 50% recycled plastic. - Self-standing design: two ridges at the bottom keep the container standing upright on even surfaces. - Dimensions: 400 x 345 x 200 mm - 10 kg max. cargo load. - Drainage hole at bottom can be opened by removing the rubber plug. Sealing the hole prevents small items from falling out and allows using the container to transport water. - Cargo net included.
$120.00
The Tailwind aerodynamic panniers blend form with function, reducing drag and battery consumption by up to 6% when tested against competitors. Their low-bulk, clean-lined design delivers increased stability with a sleek aesthetic, creating a modern storage solution that lets you go further, faster, without compromising on what you carry. - 17 L capacity for all your gear, whether you're going downtown or way out of town. - Approx. dimensions (mm): 400 x 330 x 142mm (height/width/depth). - Klickfix mounting system lets you load the bags on and off your bike quickly for easy transitions, freeing up the top of the rack for additional carrying. - Compatible with all standard racks and all racks on Specialized bikes. - Sleek, water-resistant design sheds rain so your stuff stays dry when the weather gets nasty. - Unique right- and left-sided design delivers optimal aerodynamics for increased efficiency. - Internal laptop sleeve carries your computer snug and safe (laptops up to 17" screen). - 360-degree reflective graphics help drivers see you coming. - Freestanding shape for accessible loading and unloading.
$45.00
Perfect for light groceries, extra layers, or toting take-out, the Turbo Basket is your carry-on carry-all. Paired with the MIK adapter plate, it easily attaches to the rear or front MIK-compatible racks of our Turbo Vado, Turbo Como, or Turbo Tero for a clean, simple solution for your on-bike storage. - 12 L carrying capacity. - Approx. Dimensions: (mm): 209 x 369 x 378mm (height/width/depth) - Includes cargo net to secure items in the basket. - Integrated handle for easy carrying. - Compatible with MIK adapter plate. - Compatible with any MIK rack when paired with the MIK adapter plate.
$120.00
Take your ride up a notch with the Front Rack and Adventure Plate combo. These Specialized e-bike accessories give you an extra carrying platform to carry up to 10kg on the front end of your Turbo Vado, Como, or Tero. The front rack system for the bike was designed thoughtfully for elegant integration at the front of your bike, and it features meaningful compatibility for carrying what you want, how you want to. - Compatible with Turbo Vado, Como, and Tero. - Mounts to compatible bikes via the headtube interface. - Optional MIK compatibility when the plate is removed. - Seamless integration of front light mount. - Max. Load 10kg. - Retailer installation is recommended.
$55.00
Similar to the original MATTONE, a high friction Hypalon strap with BOA Closure completes the package. Making more than 15x the power of Velcro, the BOA Closure uses a ratcheting mechanism that will not creep or loosen even under the most extreme vibration and impact. This ensures the MATTONE will remain 'high and tight' under your saddle until you need to access it... no swinging, swaying, or rattling... ever
$50.00
Named after the Italian word for Brick, Mattone is a water-resistant, ultra-compact seat bag that attaches to the rails using the BOA Closure System.  Unique zipper design allows it to be accessed while on the bike, or to open like a book when removed from the bike for easy access. Mattone is for the cyclist looking to carry a spare tube, CO2, multi-tool, and some cash in a discreet, water-resistant package. Internal divider holds ID, credit card, or cash while also protecting your tube from your multi-tool! Seat bag users fall into two categories: Seat Roll aficionados and seat bag users. Traditionally, seat bags have been simple open spaces that allowed content to jangle about, making noise and rubbing against each other. Often times a spare tube was pulled out of a seat bag to reveal it was more full of holes than the tube being replaced due to friction against a house key or multi-tool. With Mattone, we designed a layout similar to a book, where the bag can fully open to hold the tube and CO2 cartridge on one side, separated by a padded ballistic nylon 'page' separating it from the other side where you can store an inflator head, multi-tool, contact lens case, etc. The 'page' also contains a slot for a credit card, ID, money, or house key. The unique off-center Aquaguard Zipper allows the case to completely open and lay flat when off the bike, while also allowing easy access to the multi-tool and money/card slots when on the bike without risk of spilling all the contents of the bag. A high-friction Hypalon strap with BOA Closure completes the package. Making more than 15x the power of Velcro, the BOA Closure uses a ratcheting mechanism that will not creep or loosen even under the most extreme vibration and impact. This ensures the Mattone will remain 'high and tight' under your saddle until you need to access it...no swinging, swaying, or rattling...ever. - Exterior—Sleek black finish with reflective graphics - Interior—Hi-contrast red material with separate ID, credit card, or money flap - Interior Volume—Holds one inner tube, one CO2 cartridge, one tire lever (all of these components are sold separately and are not included) - BOA Closure System with open guide release on Hypalon retaining strap - YKK Aquaguard zipper - Outside Dimensions: 13cm x 8.5cm x 5.5cm - Volume: Approximately .61 L - Strap Measurements: 27cm x 4.5cm
$74.99
This spacious yet compact bag is the ideal accompaniment for day rides. Elasticated side pockets and the unique canister shape mean you'll easily have room for tools, tubes and extra clothes. The Canister Bag features a rear shock cord retention strap along with a Hypalon loop to attach a front light, which is perfect for early starts or late finishes. Handmade in our Yorkshire workshop from 100% waterproof textured nylon, with a nylon lining and finished with the classic vegan-friendly PU leather Restrap label. Weight - 116g Capacity - 1.5L WATERPROOF MATERIALS A specially developed combination of technical materials like VX21 and 1000D textured nylon work in conjunction with coated nylon linings to keep the worst of the elements at bay. VEGAN FRIENDLY Our signature brown Restrap label may look like leather but fear not - no animals have been harmed in the making of our products. PU leather or heat-pressed labels mean our kit not only looks great, but is cruelty free too. FITS ANY BIKE Our bags are designed to be as universal as possible, providing a modular luggage system for the needs of any rider, on any bike, on any journey. HANDMADE IN THE UK Our bags are handmade by our team of highly skilled machinists and rigorously tested in the Yorkshire dales. We control the manufacturing process from start to finish to guarantee the quality of the products that leave our factory door. LIFETIME WARRANTY We stand by our products and subsequently offer a comprehensive lifetime guarantee against all defects in materials and workmanship. No matter how many journeys your bag has been on, if it's on us we'll fix it. SPECIALIST ADVICE & AFTERCARE We design, we make, we ride. Our team is full of cyclists that are passionate about our products and the adventures they are for. If you need any guidance or assistance before, during or after your trip we are happy to offer expert advice.
$6.00
For all models with the QL2.1 system. Inserts are available for the two upper 16-mm mounting hooks that come with the proven QL2.1 mounting system. The inserts allow you to securely attach your ORTLIEB pannier to virtually any bike rack with smaller tube sizes (16 mm). DETAILS (PER PANNIER): - 1 pair of 8-mm inserts - 1 pair of 10-mm inserts - 1 pair of 12-mm inserts
$6.99
For all models with the QL1 system from 1993. Worn, broken or lost QL1 mounting hooks? No problem! Simply replace the hooks with a new set of QL1 hooks and adjustable handle. If the new hooks are too loose on your bike rack, use the appropriate hook inserts for a snug fit. - 2 QL1 hooks (16 mm) and adjustable handle - 1 pair each of hook inserts in sizes 8 mm and 11 mm
$9.99
For all Ultimate 4 to Ultimate Six models, as well as the Barista, Velo-Pocket and Handlebar Basket Need to replace a lost or broken cable for your handlebar mount? - 1 wire cable (105 cm) with attachment screw
$6.99
The shoulder strap for your Ultimate Compact, Bike-Box, E-Glow, E-Mate, Velo-Shopper, Trunk-Bag RC or Bike-Tourer is just what you need to carry on once you reach your destination. CONTENT: - 1 shoulder strap with plastic pad
$170.00 - $180.00
Ortlieb's far traveled classic model made of robust polyester fabric is designed for lowriders in the front or for the rear rack and is also suitable for children's bikes. With its QL2.1 system, it is quickly mounted and taken off the bike rack. - Classical pannier (pair) with roll closure - Can be used individually or as pairs for the rear or lowrider - Sides of PS490 nylon material, front and back of PD620 - QL2.1 system for racks up to 16 mm - 20 mm hook available as separate accessory (e.g. for e-bikes) - Including reduction pieces for tube diameters 8, 10, and 12 mm; with anti-scratch function reducing abrasions on rack - Top QL hooks and lower sliding hook adjustable without requiring any tools - Lower hook rail made of two-component "hard-soft" synthetic reduces abrasions on carrier - Including integrated inner pocket and shoulder strap - Symmetrical shape allows use on right or left side - Can be combined on the rack with Ortlieb Rack-Pack size 24L or 31L - Simultaneous use of Ortlieb Travel-Biker possible - Highly reflective Scotchlite reflector - Ideal for use on children's/youth bicycles - Easy to clean inside
$2.00 - $6.99
For all models from 1999 Need to replace a defective buckle? DETAILS: - 1 plastic, side-release buckle
$19.99
The Muck-Off Essentials case is large enough to hold your smartphone or with a handful of tools. Soft inner divider helps prevent damage to a spare tube or phone. External straps allow case to be attached to a MOLLE system or other bags, expanding their capacity. - Inner Zip pocket to store keys/cash/coins - Fits plus sized smartphones - Size: 17 x 9 x 2cm - MOLLE Webbing straps for attaching MOLLE accessories or onto other bags - Enough space to store your spare tube, tire levers, CO2 and mini-tool
$29.99
Lezyne's Energy Caddy is an essential for anyone who wants to keep gels and food close at hand. It features EVA molded sides and uses Velcro straps around the top tube and one around the stem to securely keep it in place. The elastic mid section expands to accommodate a wide variety of contents and provides quick access for fueling on the go.
$25.00
Lezyne takes seatpack storage to the next level with their M-Caddy. Inside, fitted neoprene compartments organize your gear for easy access, while a durable, water-resistant zipper guards against moisture. Plus, a bottom compartment with a Velcro closure securely stores your multi-tool away from your spare tube, eliminating the possibility of a premature puncture. The M-Caddy also boasts a reflective taillight loop for safety.
$21.99
Lightweight, versatile cycling organizer strap quickly and securely mounts to frame or seat post. Three labeled compartments keeps gear and tools organized and secure on the roughest trails. Perfect for carrying tire repair items on bikes with limited space. Durable, high-quality materials including polyester, neoprene, and rubberized elastics for added grip. Strap is capable of holding up to one 25g CO2 cartridge and a 29” mountain bike tube, plus a small multi tool and tire levers. Tools not included. Send it!
$9.95
Jandd Mono-Stay Rack Adaptor is used for bikes that have a wishbone-style configuration on the rear end.
$6.00 - $7.20
Jandd Bicycle Mounted Rack Clamps are for mounting racks with no braze-on points. - Stainless Steel Coated Clamp - Sold as a Pair
$23.95 - $26.95
The Tool Kit Bag is Jandd's most economical under-seat bag. - The upper straps, when pulled tight, will compress the load securely into the underside of the seat - Hatchback style opening provides easy access - Three-point retention system - Made of Dupont Cordura - 3M reflective trim - Weight: 60 grams - Capacity: 50 cubic inches
$229.99
This lightweight rear luggage rack is built with robust 14mm-diameter tubing to suit most modern rear panniers. The bespoke design integrates perfectly with GX and GXi models to transform your Gocycle into the ultimate commuting electric two-wheeler. The system is designed to detach easily so you are able to fold your Gocycle for storage or transport. - Does not include lights. If your Gocycle GX is fitted with the Integrated Light Kit, you will also need to order the Rear Luggage Rack Light Kit.
Page 1 of 15 Next page