Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Other

Zipp Bearing Kit: For Front 77 Rim Brake Hubs
$40.00
Zipp Speed Weaponry Cartridge Bearings - These 6803/61803 bearings are not interchangable with the 88/188 hub 61803 bearings
Zipp Bearing Kit: For Front/Rear 77/177 Disc Hubs and Rear 177 Rim Brake Hubs
$40.00
Zipp Speed Weaponry Cartridge Bearings: 6903/61903
Zipp Vuka Alumina Clip Riser Kit
$14.41 $25.00 42% Off
Zipps' Vuka Alumina Clip Risers work with the Vuka Alumina Above-Bar Clips (sold separately) and let you raise your armrest height. They're made of sturdy, lightweight aluminum and come in 10mm, 25mm, and 50mm sizes.
Wolf Tooth Components Roadlink
$21.95
The RoadLink is a simple device that offsets the position of your Shimano road derailleur to make it possible to run a wide-range mountain bike style cassette. It is an ideal solution for riders looking to convert their road, gravel, cyclocross, or commuter. - The RoadLink is optimized for use with ten or eleven-speed 11-36t and 11-40t cassettes - 11-42 or 10-42 setups are not supported - Works with all 10-11 speed Shimano and SRAM Road Derailleurs - Best used with Single or Double Setups - see manufacturer's site for more details
Wolf Tooth Components Ultralight Stem Cap With Integrated Spacer
$14.95
This stem cap is where your bike fashion sense and the weight weenie in you collide. This Ultralight and ultra-sleek stem cap integrates a 5mm, 10mm or 15mm headset spacer with your stem cap in finely machined piece. Why have extra steerer tube requiring spacers on top of your stem you ask? Well, many carbon steerers require that the steer tube extend above the stem. Also, riders may want the flexibility to move handlebar height up and down for different types of riding or for bike re-sale. - Design and manufactured in Minneapolis, MN USA - 1 1/8" top (straight 1 1/8" or 1 1/2" to 1 1/8" taper) steerer tubes only - 6061-T6 aluminum - 5mm internal cylinder wall height - Black aluminum bolt included Total weight (cap + bolt): 5mm= 12g. Compare to a standard flat stem cap and steel bolt at 20 grams + spacers add even more.
Wheels Manufacturing Inc. Aluminum Headset Spacers 1-1/8-inch
$3.94 - $18.64
Aluminum headset stack spacers precision-cut to ensure proper headset function. - Precision-cut for proper function - Inner Diameter: 28.9mm - Outer Diameter: 34.4mm - Precision-machined aluminum
Wheels Manufacturing Inc. Carbon Fiber Headset Spacer Kit
$210.00
62 piece assortment of tall 1-1/8" carbon fiber headset spacers.
Wheels Manufacturing Inc. Carbon Fiber Headset Spacers 1-1/8-inch
$6.83 - $13.13
Carbon fiber headset stack spacers, precision-cut to ensure proper headset function. - Compatible with all threadless and threaded headsets
Wheels Manufacturing Inc. Derailleur Hanger 100
$27.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M6x10 Flat Head Screw
Wheels Manufacturing Inc. Derailleur Hanger 157
$27.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M4x8 Flat Head Screws
Wheels Manufacturing Inc. Derailleur Hanger 166
$32.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M4x8 Flat Head Screws
Wheels Manufacturing Inc. Derailleur Hanger 322
$45.00
All Wheels Mfg. replacement derailleur hangers are produced in Colorado to exacting tolerances. - Replaces Kona Hanger #ET2 - Attaches to frame with (1) M4x8 or M4x14 flat head screw (sold separately) - CNC machined 6061 aluminum - Black anodized finish
Wheels Manufacturing Inc. Derailleur Hanger 8
$48.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring Bolt Note: Same hanger as Wheels Mfg DROPOUT-6.
Trek Trek Madone SLR Blendr Duo Base Kit with Hardware
$19.99
Allows use of two Blendr mounts on a Trek Madone SLR. Genuine replacement parts Mount light, computer, GPS and/or cameras to your top-of-the-line aero road bike. Product details - Blendr works with this simple formula: Stem + Base + Mount. Add accessory - Bases for use with the Trek Madone SLR Aero Integrated handlebar - Add any accessory mount (sold separately) for an elegant, integrated look - Includes mounting hardware
Thomson Seatpost Bolt Kit
$4.95
Bolts, clamps and washers for Thomson Seatposts and Seat Clamps. - Sold individually, includes bolt, washer and nut
Thomson Seatpost Clamp Set
$13.20 $24.00 45% Off
These clamp sets can be used on any of the Thomson Seatpost line (Elite, Masterpiece, & Droppers)
Thomson X2/X4 Stem Bolts - 6-Pc
$3.95
Thomson X2/X4 Stem Bolts-6-pc Black
Surly Hurdy Gurdy
$16.12 - $35.00 $30.00 - $35.00 Up to 46% Off
Hurdy Gurdy is another nifty device that keeps a rear wheel from slipping forward in the dropout under pedal load. It's designed for the Cross-Check's semi-horizontal front-loading dropouts, and will also work on many other similar dropouts. Hurdy Gurdy is investment cast of stainless steel for durability and good looks, and shares many of Tuggnut's design features. Its two axle holes allow for a wide variety of fore/aft wheel positions, it will work with standard QRs, bolted axles, and nutted axles up to 10mm.
Supacaz Star Capz Anodized
$4.40 $8.99 51% Off
An often overlooked, yet critical visual point is the stem cap. We held nothing back creating our stem caps and are proud to offer Star Capz in all your favorite Supacaz colors. Let the star guide you. - 100% anodized aluminum - Laser-etched - Supalite
Sunlite Derailleur Hanger
$3.99 - $38.99
- 6061 Forged Alloy - Made to O.E.M. specifications - Correct hardness to reduce damage to frame upon impact
Silca Pista/Superpista Nut/Washer Kit
$9.00
This kit contains the hardware required to support a leather gasket in all SILCA floor pumps. Reusing the original nut can lead to later loosening of the assembly as the nylon insert will take a set over time. A new bolt kit guarantees years and years of trouble free service. Kit includes 5 parts: - Locking Nut, lower washer, and back nut are universal to all PISTA and SUPERPISTA Pumps - 28mm diameter or pumps prior to 2008 will use the thicker 24.6mm back washer - 30mm diameter or pumps after 2008 will use thinner 28mm back washer
Shimano BT-R1A External Di2 Battery
$79.99
Shimano BT-R1A External Di2 Battery - All Di2 components on the bicycle require the same firmware version. Using Di2 components with different firmware versions may cause malfunctions - Use Di2 system checker to update component firmware - Di2 External Battery, battery charger, and power cable are universal between Dura-Ace 9070, 7970, Ultegra 6870, 6770 and Alfine Di2 systems - Battery weight: 71 grams
Shimano Di2 Battery Charger
$103.99 - $135.99
Shimano's Di2 electric drivetrain takes shifting to the next level. Two Di2 Battery Chargers are available. Choose the model designed for your system's battery. An additional power cable is required for the external-style battery charger (sold separately). These chargers fully charge the battery in 90 minutes.
Shimano Di2 Battery Charger Cable
$8.99
Shimano's Di2 Battery Charger Cable plugs into the Battery Charger (shown, but sold separately) so you can keep your electronic drivetrain at full power.
Shimano Di2 E-Tube Dummy Plug
$1.65 $2.11 22% Off
Shimano E-tube Dummy Plugs - Extra E-Tube plugs for sealing unused ports on shifters or junction boxes - Sold each
Shimano Di2 E-Tube Wire
$26.99
This is the correct plug-and-play wire for Shimano's E-Tube Di2 electric-shifting systems. It comes in sixteen different lengths, so choose the one(s) that's right for your Di2 E-Tube wiring configuration.
Shimano Dura-Ace Di2 Electronic External Rear Wiring Kit
$99.44 - $131.34 $249.99 Up to 60% Off
Shimano's Dura-Ace Di2 takes shifting to the next level. The Rear Wiring Kit connects to both the left and right shifters and Junction Box A (which displays battery power and allows manual adjusting). It also includes a battery mount, cable covers to route and hide the cables and a wire plug/unplug tool. The External Kit is meant to be run on the outside of the frame.
Shimano Dura-Ace R9150 Di2 Front Derailleur Braze-on Adaptor
$16.99
Shimano Front Derailleur Braze-On Adaptors allow you to run a braze-on style front derailleur on a frame that doesn't have a front derailleur braze-on mount. Multiple sizes cover fitment on most frames.
Shimano Ultegra ST-6870 Di2 STI Lever Hoods
$13.00
Shimano Di2 STI lever hoods. - Fits Ultegra ST-6870 Di2 levers only
Salsa Lip-Lock Seat Collar
$22.00
Lip-Locks secure your seatpost and add functional bling to your ride. - Non-quick release version of the Flip-Lock - Machined 6061-AL with stainless steel pivot and bolt - Anodized with laser-etched logo - For smooth operation, lightly grease the bolt threads
Page 1 of 21 Next page