Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Grips

Bontrager SE Elite
$24.99
Lock on to the trail Confidently handle any trail with the SE Elite mountain bike grip. This 32mm single lock-on grip with core lock clamps holds tight on any terrain, and a unique opposing tread pattern provides the perfect amount of padding for your palms while providing traction at your fingertips. Key features - Opposing tread design absorbs shock in palms with a biting grip in fingers - Rubber compound and design provides confident grip, control, and comfort - Tread features continuous channels to funnel sweat for effective moisture management - Single-clamp design maximizes grip surface for secure, predictable performance - Core-lock clamp eliminates slipping by securing grip core to bar - 3mm M4 bolt increases hold and resists stripping - 32mm diameter
Bontrager XR Elite
$24.99
Lock on to the trail Confidently handle any trail with the XR Elite mountain bike grip. This 30mm single lock-on grip features core lock clamps to hold tight on any terrain, and the perfect combination of rubber compound and tread design adds comfort and confidence on any trail. Key features - Tread and rubber compound provide secure grip, control, and comfort - Tread features continuous channels to funnel sweat for effective moisture management - Single-clamp design maximizes grip surface for secure, predictable performance - Core-lock clamp eliminates slipping by securing grip core to bar - 3mm M4 bolt increases hold and resists stripping - 30mm diameter
Race Face Love Handle
$24.99
What comes between you and the mountain bike you love? The Love Handle, a very thin profile, double lock-on grip featuring Race Face's durable yet super tacky silicone compound that delivers long wear and all weather stickiness. The Love Handle is not only about its silicone good looks though, the palm area is contoured with channels to allow air to circulate and moisture to dissipate while the diamond pattern in the finger grip zone provides tons of control. Get a good grip; you won't want to lose these love handles! - Double lock on grip - Super slim low profile design with directional shape - Race Face's durable yet super tacky silicone compound won't wear out as quickly as typical grips and have a superior sticky feel even when wet - Directional design features contoured palm area with moisture dissipating channels and diamond patterned underside to enhance finger control and mitigate unwanted slips - Lightweight construction
Bontrager XR Silicone
$16.99
- Silicone foam blend provides excellent grip and shock absorption - Simple design maximizes durability and minimizes weight - 32mm diameter
Supacaz Grizips Bling
$20.00
Superior hand feel that you need to feel to believe. Winner of world cups, Cape Epics, and stages of La Ruta de Conquistadores. - Material: Dual-density high-performance rubber - Supacaz pattern design for max control and ultimate tackiness - Diameter: 32mm - Star Ringz: 100% Aluminum - Anodized/powder coated - Laser-etched
ODI Aaron Gwin Lock-On MTB Grip
$31.95
- Developed in collaboration with 2x World Cup Champion Aaron Gwin - Ergonomic single clamp design with aluminum reinforced ends - Angled rib pattern matches the articulation points of your hand - Bonus pack includes Lock-On grips and v2.1 clamp
Ergon GP3
$49.95
The Ergon grip with a 3-finger bar end provides a wide range of use, ranging from mountain bikes to fitness to touring bikes. The bar end angle can be adjusted independently from the angle of the grip for the perfect personal fit and the bar end doubles as a clamp to lock the grip in place and prevent movement while riding. Like all the grips in the GP-Series, the GP3 eliminates numb hands, aching fingers, and tired forearms. The GP3 is made from 100% German, TÜV-certified rubber compounds of the purest quality. - Carbon bar compatible - Clamp: fiberglass composite with rubber inserts - Uses: touring, commuting
ESI Fit XC Grips
$32.92
- Lightweight silicone grips that conform to your hand for maximum grip and shock absorption to reduce hand fatigue and arm pump - UV resistant and non-porous, they will not fade or harden - Non-slip grip compound that stays put even when wet - Fit XC: 13
Lizard Skins Lock-On Bearclaw Grip
$29.99
Darren Berrecloth is a legendary freerider who has competed in nearly every major freeride event and has created some of the most memorable moments in mountain biking. We are thrilled to introduce the new Lizard Skins "Bearclaw" lock-on grips. These grips have been designed and created to Darren's specifications and are our thinnest lock-on grips. Not only do these grips feature a comfortable low profile, they also have an extremely comfortable pattern and compound for use with or without gloves. Length: 130 mm Weight (with plugs): 105 grams Diameter: 29.5 mm
Lizard Skins Lock-On Northshore Grips
$29.99
The North Shore mountains of British Columbia are home to some of the most amazing trails in the world. We are not only excited to announce the redesigned Northshore grip but also our new partnership with the North Shore Mountain Biking Association. A percentage of the proceeds from the sales of these grips are used to support the NSMBA and the trail building on the North Shore. The new Northshore grip is our thickest lock-on grip and features a series of textured shock absorbing sections to provide a comfortable and controlled ride. Length: 130 mm Weight (with plugs): 125 grams Diameter: 33 mm
Lizard Skins Logo Lock-On Grips
$29.99
Experience what so many cyclists are using, the Logo grip. It satisfies many riders providing durability. This is a great grip for those with medium-sized hands. Lock-on grips include the grips, clamps, screws and plugs. - Length: 130 mm - Weight (with plugs): 120 grams - Diameter: 31.5 mm
SRAM Racing Grips
$7.00
SRAM Racing Grips offer a great grip for total control and come in several sizes to fit your front-end setup. These durable rubber grips have stylish logos stamped in them and are built to last and not slip.
Supacaz Siliconez
$20.00
Siliconez are the grip of choice for top world cup XC racers looking for both weight savings and performance. Feeling is believing with Supacaz’s patented memory foam attributes that mold to your hand providing consistent grip in any condition. The shock-absorbing qualities reduce fatigue of not only hands but the entire upper body. - Material: Silicone Foam - Diameter: 32mm(sl), 34mm(xl), 36mm (xxl) - Length: 130mm - UV resistant - Latex-free
ODI F-1 Series Vapor Grips
$18.95
F-1 Series Vapor Grips are made from our exclusive A.I.R.E compound which infuses air into the grip, reducing weight by over 30% and providing a slower rebound and response for improved comfort. - Medium diameter (31.5mm) - Reinforced inner layer for added durability - Added surface pattern provides improved grip in all conditions - Ergonomic finger cutouts for a better gripping surface and improved control
ODI AG-2 Lock-On Grips
$35.00
Our initial partnership with Aaron Gwin produced numerous innovations that pushed grip technology to new levels. With the new AG2 Grips, we wanted to take things even further. We started with an ultra-soft pro compound and built it into an improved knurl pattern that provides extra tackiness and control along with reduced vibration transfer. We coupled this with our exclusive offset design that offers even more impact dampening where it is needed most, without increasing the grip diameter. We then redesigned the most impact-prone portions of the grips to provide an even better feel and accurate control when riding. - Grips feature a larger diameter than the original grips (30.5mm) with offset padding towards the rider for improved comfort - Soft Pro compound provides excellent shock absorption - Redesigned surface pattern for improved traction and vibration dampening - Redesigned ends provide an improved feel - Provide extra durability against grip blowout - Thin ribs add control without a bulky feel - Uses our race-proven Version 2.1 Lock-On system - Molded over the aluminum endcap, the end provides durability but will not gouge
Lizard Skins Lock On Charger Grip
$29.99
Feel the comfort of Lizard's popular Charger grip. The unique pattern gives the Charger grip an amazingly comfortable feel that is soft yet long lasting. Lock-on grips include the grips, clamps, screws and plugs. - Length: 130 mm - Weight (with plugs): 105 grams - Diameter: 31.25 mm
Ergon GP3 BioKork
$59.95
The BioKork version of the GP3 with a 3-finger bar end provides a wide range of use, ranging from mountain bikes to fitness to touring bikes. The bar end angle can be adjusted independently from the angle of the grip for the perfect personal fit and the bar end doubles as a clamp to lock the grip in place and prevent movement while riding. Like all the grips in the GP-Series, the GP3 BioKork eliminates numb hands, aching fingers, and tired forearms. The grip body is made up of 40% cork, which is sustainably grown in Portugal and able to meet strict ecological guidelines. The central core uses 20% less plastic and is reinforced with natural fibers. All components of the grip are produced with regards to sustainability. - Carbon bar compatible - Bar end material: fiberglass composite with rubber inserts - Uses: mountain biking, touring, commuting
Ergon GS3
$59.95
The GS3 combines comfort in a lightweight package, ideal for long distance endurance athletes. The three-finger bar end is made out of fiberglass reinforced composite, which offers more hand positions for increased comfort and leverage on long mountain bike rides. Additional rubber is used on the bar end, improving the rider's grip during hand position changes. The exclusive German-produced rubber compound found in the grip and on the bar end enables precise steering and control, all the while still maximizing optimized damping features. The grip provides ideal comfort over long distances through ultimate pressure distribution and ride-tuned flex. - Carbon bar compatible - Bar end: fiberglass composite with rubber inserts
Ergon GP5 BioKork
$79.95
The BioKork version with a full size, multi-position bar end for maximum hand positions, increased leverage, and stability when climbing or during out-of-the-saddle cycling. Perfect for commuting, touring, or for those who like a longer bar end. The bar end angle can be adjusted independently from the angle of the grip for the perfect personal fit and the bar end doubles as a clamp to lock the grip in place and prevent movement while riding. Like all the grips in the GP-Series, the GP5 BioKork eliminates numb hands, aching fingers, and tired forearms. The grip body is made up of 40% cork, which is sustainably grown in Portugal and able to meet strict ecological guidelines. The central core uses 20% less plastic and is reinforced with natural fibers. All components of the grip are produced with regards to sustainability. - Cannot be used on carbon handlebars - Bar end material: fiberglass composite with rubber inserts - Uses: touring, commuting
Lizard Skins Lock-On Charger Evo
$29.99
The Charger Evo is the most complex grip we’ve ever created. Dual patterned textures on each grip allow riders to absorb shock and feel handlebar support with every move. Lock-on ring design ensures the grip will stay in place for long lasting use. Lock-On Grips include the grips, clamps, screws, and plugs. - Length: 136mm - Weight (with plugs): 90 grams - Diameter: Medium (31mm)
Lizard Skins DSP Bar Tape V2 3.2mm
$43.99
Our thickest bar tape is ideal for your next double century, gravel grinder or cyclocross race. Discover why our Pro Tour teams spec this tape for the Spring Classics.
Pro Bar End Plugs
$15.99
• Anodized alloy cap • Fits handlebar inner diameter from 17.5mm • For MTB and Road use • Low profile design • Black plated bolt
Dimension Hand-Stitched Leather Grips
$24.99
Dimension Hand-Stitched Leather Grips, solid color with contrast stitching. - Classic-style grips for cruisers or mountain bikes - Flange: No - Grip Shift Specific: No - Length: 127mm - Lock On: No - Shape: Round - Weight: 58g
Ergon GE1 Evo Factory
$39.95
The Ergon GE1 Evo Factory is the evolution of the GE1, a popular trail-oriented ergonomic grip for wide riser bars. Thanks to the feedback collected from countless Enduro World Series riders, the Ergon design team improved the GE1 by altering the compound to give a softer, more positive contact. It actively supports the correct torso/forearm position during downhill riding, offering greater control and protecting the sensitive ulnar nerve. Its forged inner clamp and fully integrated grip end connected to the inner core provides a soft, damping grip edge, comfortable right to the outer edge. These grips are compatible with carbon handlebars, so get a pair for race day and everyday.
Electra Paradise Long & Short Grips
$19.99
Grips are a key point of contact between you and your bike. It’s like you’re holding hands. - Hand-stitched grips with a beige tropical leaf design - Long/short sets designed for bikes with one twist shifters - Length: 125mm (long), 102mm (short) - Matching saddle available for some models - Set of two grips
Brooks Slender Grips 130mm & 130mm
$90.00
Brooks Slender Leather Grips feature vegetable-tanned leather tape, and are designed to offer an alternative performance option for the user, while maintaining the standard for sustainability set by the Plump Grips, allowing the user to replace worn parts if necessary. The design incorporates an aluminum shell around which the bar tape is wrapped in the manner of traditional handlebar tape. The leather is then held in place by aluminum and steel clamps which can be removed in the event that the tape requires replacement. The tape is made from the same vegetable-tanned leather used for Brooks Saddles and natural cork. Made in Italy.
Brooks Cambium Comfort Grips 130mm
$40.00
Brooks' best rubber handlebar grips with organic cotton for a natural look and feel. Full 130mm set.
Evo Throttle Grips
$8.99
- Soft Kraton rubber construction - Anti-vibration large pad design - Comfortable and non-slip - 135mm width
Ergon GC1 BioKork
$39.95
The sustainable BioKork version of the GC1 grip, developed for the ergonomic demands of cyclists riding city bikes, beach cruisers, or touring bikes with upright, rearward-swept handlebars. Using traditional round grips on these specific, laid-back handlebars causes an uncomfortable bend in the wrist. The GC1 BioKork corrects the wrist position through its anatomic and ergonomically correct form, delivering exceptional comfort. The grip body is made up of 40% cork, which is sustainably grown in Portugal and able to meet strict ecological guidelines. The central core uses 20% less plastic and is reinforced with natural fibers. All components of the grip are produced with regards to sustainability. A forged aluminum clamp allows the grip to be adjusted for perfect fit, can be easily readjusted, and eliminates twisting once installed.
Lizard Skins Logo Dual Compound Grips
$8.99 - $9.00
- Dual compound design with a soft, grippy feel - Dual compound is made with Kraton/gel material for added strength and durability - Includes push-in plugs
WTB Thinline Padloc Grip
$34.95
A thin silhouette and opposing working edges provide irrefutable grip, even in the wet. The Pilot’s 28mm svelte shape provides a paired down though classic profile that features the PadLoc Relief so that even slim profiles get big comfort. - Compatible with PadLoc-ready bars only.
Dimension Cruiser Grips
$7.99
Dimension Classic Cruiser Grips available in black and white. - Flange: No - Grip Shift Specific: No - Length: 140mm - Lock On: No - Shape: Round - Weight: 104g
Brooks Plump Leather Grips
$90.00
In the Brooks tradition, these grips are made of natural leather, the same long-wearing leather used for Brooks saddle tops. Each grip is made with a stack of leather washers. These washers are held together by 3 spokes, enabling the grip to be adjusted to the desired length. The standard length of each grip is 130mm, but each grip can be shortened to the desired length independently. The grips are delivered in a box containing shorter 80mm spokes to make them even shorter. - Adjustable Length from 80 mm to 130 mm - Inner Diameter: 22.2 mm - Weight: 290g per Pair
Ergon GP2
$39.95
The Ergon grip with a 2-finger, mini bar end, delivers more hand positions and improved leverage and stability when climbing or during out-of-the-saddle cycling. The bar end angle can be adjusted independently from the angle of the grip for the perfect personal fit and the bar end doubles as a clamp to lock the grip in place and prevent movement while riding. Like all the grips in the GP Series, the GP2 eliminates numb hands, aching fingers, and tired forearms. The GP2 is made from 100% German, TÜV-certified rubber compounds of the purest quality. - Carbon bar compatible - Uses: mountain biking, touring, commuting - Clamp: fiberglass composite with rubber inserts
Ergon GA2
$29.95
Ergon's GA2 All-Mountain / Gravity grip has superb tactile feel thanks to a super-soft, UV stable rubber compound exclusively developed and manufactured in Germany for Ergon. The ergonomic shape requires less rider grip pressure while specific grip zones matched to the shape of the hand increase tactile feedback and traction. The inner construction varies in thickness to allow greater damping, which results in less ulnar nerve stress. The inboard aluminum clamp holds grips securely, allows even more grip area at the end of the bars, and makes these grips carbon-bar friendly.
Ergon GC1
$29.95
The GC1 was developed for the ergonomic demands of cyclists riding city bikes, beach cruisers, or touring bikes with upright, rearward-swept handlebars. Using traditional round grips on these specific, laid-back handlebars causes an uncomfortable bend in the wrist. The GC1 corrects the wrist position through its anatomic and ergonomically correct form, delivering exceptional comfort. The GC1 is made from 100% German, TÜV-certified rubber compounds of the purest quality. A forged aluminum clamp allows the grip to be adjusted for perfect fit, can be easily readjusted, and eliminates twisting once installed.
WTB Technical Trail
$11.95
WTB's Technical Trails feature built-in zip-tie channels to keep them stable in sloppy conditions. And, these slim grips are easy to cut and are compatible with trigger and grip shifters.
Supacaz Grizips Splash
$20.00
Superior hand feel that you need to feel to believe. Winner of world cups, Cape Epics, and stages of La Ruta de Conquistadores. - Material: Dual-density high-performance rubber - Supacaz pattern design for max control and ultimate tackiness - Diameter: 32mm - Star Ringz: 100% Aluminum - Anodized/powder coated - Laser-etched
Ergon GP4
$59.95
The GP grip with a full-size comfort bar end delivers maximum hand positions, increased leverage, and stability when climbing or during out-of-the-saddle cycling when touring or on fitness bikes. The bar end angle can be adjusted independently from the angle of the grip for the perfect personal fit and the bar end doubles as a clamp to lock the grip in place and prevent movement while riding. Like all the grips in the GP-Series, the GP4 eliminates numb hands, aching fingers, and tired forearms. The GP4 is made from 100% German, TÜV-certified rubber compounds of the purest quality. (Cannot be used on carbon handlebars)
Brooks Cambium Comfort Grips
$40.00
The Cambium Comfort Grip! Organic cotton canvas is vulcanized and bonded to organic rubber to provide superior comfort and style. 100mm set for use with dual grip shifting systems and handlebars with shorter contact area, such as Brompton "M-Type" handlebars.
SRAM Handlebar End Plugs (S logo)
$6.00
Customize your handlebars with new end plugs. Compatible with MTB and Road, carbon and aluminum.
Electra Hand-Stitched Long & Short Grip
$14.99
As one of the key points of contact between the rider and bike, comfortable grips are a must-have. - Vintage-style, hand-stitched grips - Long/short sets designed for bikes with one twist shifters - Length: 125mm (long), 102mm (short) - Set of two grips
Pro Dual Lock Sport
$29.99
The Pro Dua Lock Sport grips feature an outer alloy lockring on the grip end and an internal lockring on the outer end. The dual lock results in an ultra-secure fitment to the bars which translates to better control to the rider in extreme riding conditions. - Dual compound material - Pressure optimized core for enhanced pressure relief - Diameter: 32mm
Lizard Skins Single Compound MacAskill
$8.99
The MacAskill Signature grip is now available in a Single Compound grip. This grip has a larger diameter in key areas of the grip to provide better cushioning for impacts and vibration damping. Designed by Danny MacAskill! Single Compound Grips include push-in plugs. - Length: 136mm - Weight (with plugs): 88 grams - Diameter: Small (29mm)
Ergon GD1 Factory
$34.95
Ergon introduces the first MTB Gravity Grip with tapered grip shape (patent pend.) which features more damping in the outer area of the grip and a slim inner diameter. The unique rubber compound, manufactured in Germany, offers adhesive and rebound properties which have never been seen before in a bicycle grip. The grip feeling is soft, but still very defined and precise. The surface profile provides the hands with optimal grip and reduced gripping force. The slim inner stop additionally improves fast positioning of the hand. The high-strength aluminum inner clamp keeps the grip twist-proof, even on carbon handlebars. GD1 Slim Factory: With an inner-diameter of 29mm and outer-diameter of 30.5mm, the GD1 Slim Factory is recommended for riders with glove size Small / Medium (6.5 – 8.5) or riders who prefer a slim grip thickness. GD1 Regular Factory: With an inner-diameter of 30mm and outer-diameter of 32mm, the GD1 Factory has, in comparison to the GD1 Slim Factory, more damping characteristics and is recommended for riders with glove size L/XL (8.5 – 10.5) or riders who prefer a normal grip thickness. - Uses: downhill, freeride, gravity disciplines - Clamp: aluminium / CNC machined - Material: custom rubber compound
Ritchey WCS True Grips
$12.95
Ritchey's WCS TrueGrips are ultra-light grips that offer hand-saving comfort. They're made of tough neoprene foam that's plush and grippy — even when wet.
WTB Comfort Zone Clamp-On
$23.95
WTB's Comfort Zone Clamp-Ons feature an ergonomic shape with a soft rubber. This design gives you more surface area to hold, absorbs shocks and vibrations, and prevents hot spots in your palms.
Lizard Skins Single Compound Northshore Grips
$8.99
The North Shore mountains of British Columbia are home to some of the most amazing trails in the world. We are not only excited to announce the redesigned Northshore grip but also our new partnership with the North Shore Mountain Biking Association. A percentage of the proceeds from the sales of these grips are used to support the NSMBA and the trail building on the North Shore. The new Northshore grip is our thickest single compound grip and features a series of textured shock absorbing sections to provide a comfortable and controlled ride. - Length: 130 mm - Weight (with plugs): 112 grams - Diameter: 33.25 mm
Pro Lock On Race
$26.99
The Pro Lock On Race grips are constructed of dual compound material that offers a tactile feel on the bars. The knurled texture provides superior grip, while the pressure-optimized core offers enhanced pressure relief. - Sleek anodized alloy lockring - Diameter: 32mm
SRAM DH Silicone Locking Grips
$27.00
When you're going fast, you need to hold on to something. SRAM's DH Silicone Locking Grips have you covered with clamps on both ends for a secure bar hold. Their rubber surface with thumb donut and "S" logo design offer a great feel.
Pro Ergonomic Grips
$29.99
The Pro Ergonomic grips feature a comfortable ergonomic shape and are designed to match with the Pro ergonomic bar ends (sold separately). - Dual compound material - Sleek anodized alloy lockring - Diameter: 32mm - Length: 137mm
Bontrager XR Trail Elite MTB Grip
$24.99
Grip it and rip it The XR Trail Elite mountain bike grip has a finned texture that forms to your hand to keep you comfortable on all-day riding sessions. A higher density material surrounds the end of the grip for added durability and the lightweight CoreLock clamp holds the grip securely in place for confidence on even the most technical trails. Product details - Finned texture pattern conforms to your hand for supportive grip - Rubber compound and tread design is optimized for control and comfort - Single-clamp design maximizes grip surface for secure, predictable performance - Alloy core-lock clamp eliminates slipping by securing grip core to bar - Higher-density end cap resists scraping for added durability - 3mm M4 bolt increases hold and resists stripping - 31mm diameter
Pro Lock On Sport Grips
$29.99
The Lock On Sport grips from Pro offer supreme control and confident grip with dual compound material construction and a pressure-optimized core for enhanced pressure relief. - Sleek anodized alloy lockring - Diameter: 32mm
Evo Cross Trail Grips
$19.99
- Durable Kraton rubber construction - Angle pattern is comfortable yet secure - Fits most handlebars - 125mm width
SRAM Red Gel Handlebar Transition Pad Set
$23.00
- Clear, gel pads provide added shock absorption while positioned between the lever hood and top-handlebar transition under handlebar tape - Two, left and right sets with integrated channels for either inside or outside, under tape cable routing
Portland Design Works Cork Chop Grips
$30.00
PDW's Cork Chop Grips pair classic, vintage style with grippy ergonomics. Pop the cork and relieve the pressure: It's a celebration. • 142 grams • 5-inches in length • Cork/rubber compound
Eclypse Supergrip Bar Tape
$26.99
- Polymer providing exceptional grip in all conditions - Excellent vibration and shock absorption - 220cm x 3cm - longer than the competition - More flexible finishing tape - Screw-on end plugs included
Lizard Skins Single Compound Logo Grips
$6.99
Experience what so many cyclists are using, the Logo grip. It satisfies many riders providing durability. This is a great grip for those with medium-sized hands. Single compound grip includes push in plugs. - Length: 130 mm - Weight (with plugs): 109 grams - Diameter: 31.75 mm
Previous page Page 2 of 2