Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Bottom Brackets

SRAM GXP100 Team Bottom Bracket - Fat Bike
$38.00
Get the most out of SRAM's high-tech cranksets with the GXP Team Bottom Bracket. Built to last, this super-smooth bottom bracket lets your SRAM GXP crankset (sold separately) spin effortlessly without weighing you down. This GXP100 bottom bracket matches SRAM's Fat Bike cranks.
SRAM PressFit 30 Bottom Bracket
$50.00
SRAM saw the opportunity to make a better press fit system where all the best from BB30 and PressFit bottom brackets would be combined into one captivating package. Pressfit 30 will feature an integrated seal, pre-assembled into the cups, to further prolong bearing life. The key difference with Pressfit 30 is how the bearings are fitted into the frame. Bearings are housed in nylon cups which will be pressed into the frames bottom bracket shell. This bottom bracket is designed for 30mm spindle cranksets. Frames will need a 46mm inner-diameter bottom bracket shell to accommodate this system. Pressfit 30 for road will require a 68mm wide shell while Pressfit 30 for MTB will require a 73mm wide shell. - Easy installation - PressFit cups for lighter weight - Narrow Q-factor and more ankle clearance - Integrated gutter seal to prolong life - Integrated adjuster - 30mm spindle diameter
SRAM PressFit 30 Ceramic Bearing Bottom Bracket
$245.00
SRAM saw the opportunity to make a better press fit system where all the best from BB30 and PressFit bottom brackets would be combined into one captivating package. Pressfit 30 will feature an integrated seal, pre-assembled into the cups, to further prolong bearing life. The key difference with Pressfit 30 is how the bearings are fitted into the frame. Bearings are housed in nylon cups which will be pressed into the frames bottom bracket shell. This bottom bracket is designed for 30mm spindle cranksets. - Easy installation - PressFit cups for lighter weight - Narrow Q-factor and more ankle clearance - Integrated gutter seal to prolong life - Integrated adjuster - 30mm spindle diameter For installing any crankset with a BB30 spindle into any BB30 frame or frame with 46mm I.D. press fit diameter bottom bracket shell - BB Shell Width (mm): 68 mm, 73 mm, 79 mm, 86 mm, 92 mm - BB/Frame Interface: 386 EVO, BBright Press Fit, PF30, 392 EVO - Bottom Bracket Shell I.D.: 46 - Spindle Interface Type: e*Thirteen P3 Connect, 392 EVO, 386 EVO, Campagnolo Over-Torque, Hope BSA30, RaceFace/Easton CINCH, Rotor 3D+
SRAM PressFit GXP Stainless Steel Bearing Bottom Bracket
$46.00
A variant of the external bottom bracket, PressFit cut weight by up to 40 grams and provide easier installation by allowing you to press the bearing cups into the frame instead of threading them. There's no change to the crank — spindle length and diameter remain the same. - BB Shell Width (mm): 104.5 mm , 107 mm
SRAM Red GXP BlackBox Bottom Bracket Cups w/ Ceramic Bearings
$210.00 - $227.00
SRAM's Red GXP BlackBox Bottom Bracket Cups are the premium choice for getting the most out of every pedal stroke. They feature ceramic bearings that drastically reduce drag on the crankset, meaning more of your power goes directly to the road. Plus, the ceramic bearings and stainless-steel races mean these cups are incredibly light and durable, too!
Race Face Turbine X-Type External Bottom Bracket
$59.99
• Custom 6805, 16 ball retainer bearings with titanium coated races for outstanding corrosion resistance • Bearings feature Race Face's custom triple wiper seal to better retain grease and keep contaminants out • Designed to be used with cranksets that have either X-Type or EXI spindles
Problem Solvers Bushnell Fat Bike Eccentric Bottom Bracket
$150.00
The Problem Solvers Bushnell Eccentric Bottom Bracket is the industry leading design for chain tension adjustment on tandem and dedicated single speed bikes equipped with eccentric bottom bracket shells. The classic version features full-body, aluminum construction across the shell for maximum surface area friction and additional value. The Bushnell Fat Bike Eccentric Bottom Bracket is designed for the 100mm shells in most fat bikes. - Accepts English threaded bottom bracket cups - Classic, full-body design - Diameter of part - 2.118 inches (53.78mm) - Fits BB shells from 53.8 ~ 54mm I.D. without shim - Fits BB shells up to 100mm width
Problem Solvers Bushnell Lightweight Eccentric Bottom Bracket
$180.00
The Problem Solvers Bushnell Eccentric Bottom Bracket is the industry leading design for chain tension adjustment on tandem and dedicated single speed bikes equipped with eccentric bottom bracket shells. The lightweight version features additional machining and drilling of the alloy body to reduce weight. - Accepts English threaded bottom bracket cups - Lightweight, cut-out body design - Outer Diameter - 54mm
FSA BB30/PF30 to English Thread Bottom Bracket Adapter
$28.99
Running a conventional threaded bottom bracket on your BB30 or PF30 frame doesn't have to be complicated. This press-fit adapter from FSA goes in snug and opens up a lot of crankset possibilities for your BB30/PF30 frame. - Aluminum - Allows conventional threaded bottom brackets to be installed in a BB30 or PF30 frame - Install with headset press (not included) and green Loctite (included)
FSA BB90-MegaExo Adapter Bottom Bracket
$44.99 - $140.99
- Enables the use of a MegaExo (24mm spindle) crankset on a BB90 (Trek Madone) frame - Choose MegaExo carbon (ceramic bearings with red-anodized aluminum shields) or alloy (stainless steel bearings with black plastic shields)
FSA MegaExo Bottom Bracket Cupset
$36.99 - $62.99
- Left and right bottom bracket cups with standard bearings for FSA MegaExo cranks - BB-9050 is for 24mm spindle 68/73mm MTB K-Force and Team Issue cranks - BB-8681 for K-Force Light (a non-ceramic option) and SLK Light Road MegaExo cranks (BB-8681 bearing covers have been redesigned so that the spindle now rides directly on the bearing itself) - BB-7000 is for 24mm spindle 68/73mm shell MTB Gravity Lite, Moto X and Afterburner cranks - BB-7000 is for 24mm spindle 83mm shell MTB Gravity Lite cranks - BB-6200 is for 24mm spindle 68mm shell Energy, Gossamer and Omega No Bolt Design cranks - BB-6000 is for 24mm spindle 68mm shell Energy, Gossamer and Omega cranks - BB-4000 is for 19mm spindle 69mm shell Omega cranks - BB-1000 is for 19mm spindle 68/73mm MTB Gamma cranks - 1.37" x 24tpi (English threads) or M36 x 24tpi (Italian threads)
Dimension Cruiser/BMX Bottom Bracket
$8.99
Dimension American bottom bracket for one-piece cranks. - Include cups, bearings and cones - 24 tpi
Chris King PressFit 24 Bottom Bracket Conversion Kit
$28.00
Chris King's Bottom Bracket Conversion Kits make sure that you can match up your frame with your cranks, all while enjoying the super smooth performance of King's in-house stainless-steel bearings. These adapters are compatible with frames that feature a Press Fit 24 bottom bracket.
Chris King PressFit 24mm
$154.00
Our Press Fit 24 bottom bracket is machined to aerospace-level tolerances to ensure that your bike has the precision fit that you have come to expect from Chris King’s legendary components. Each Press Fit 24 bottom bracket includes our exclusive fully serviceable made-in-house bearings that integrate with our easy-to-use grease injection system to create a bottom bracket with unparalleled performance and durability. - Engineered, manufactured and assembled in Portland, Oregon USA - 5 year built-to-last warranty - Easily serviceable with our integrated grease injection tool - Legendary in-house made bearings - Responsibly lightweight - Available ceramic bearing upgrade - Designed for BB shells with a 41mm ID (Inner Diameter) measurement - Conversion kits available for most crank sizes
Chris King PressFit 30 Bottom Bracket Conversion Kit
$21.00 - $28.00
Chris King's Bottom Bracket Conversion Kits make sure that you can match up your frame with your cranks, all while enjoying the super smooth performance of King's in-house stainless steel bearings. These adapters are compatible with frames that feature a Press Fit 30 bottom bracket.
Chris King ThreadFit 24 Ceramic
$253.00
Our ThreadFit 24 bottom bracket is designed and built to be durable, serviceable, and silent. Manufactured to create a precise and functional interface between your frame’s bottom bracket shell and your cranks to ensure that your cranks will spin lightly and without interference. We have developed a range of conversion kits that allow our ThreadFit 24 to be used with a wide selection of road and mountain bike cranks. - Engineered, manufactured and assembled in Portland, Oregon USA - 5-year built-to-last warranty - Legendary made-in-house bearings - Responsibly lightweight - Easily serviceable with our integrated grease injection system - Find your fit with our required conversion kits
Chris King ThreadFit 24 Conversion Kit #10
$21.00
All of Chris King's bottom bracket offerings will need an appropriate Conversion Kit specific to the brand and model of crankset to be used. - 68mm Threaded BB Shell - 24mm Mountain Cranksets - Common Cranks: Shimano mountain, FSA mountain, FSA SLK Light, Gravity, Race Face mountain, Rotor, Surly - Conversion Kit required to work with the Chris King ThreadFit 24 bottom bracket
Chris King ThreadFit 24 Conversion Kit #12
$21.00
All of Chris King's bottom bracket offerings will need an appropriate Conversion Kit specific to the brand and model of crankset to be used. - 73mm Threaded BB Shell - 24mm Mountain Cranksets - Common Cranks: Shimano mountain, FSA mountain, FSA SLK Light, Gravity, Race Face mountain, Rotor, Surly - Conversion Kit required to work with the Chris King ThreadFit 24 bottom bracket
Chris King ThreadFit 24 Conversion Kit #8
$21.00
All of Chris King's bottom bracket offerings will need an appropriate Conversion Kit specific to the brand and model of crankset to be used. - 68mm Threaded BB Shell - 24mm Road Cranksets - Common Cranks: Shimano Road, FSA road, Rotor - Conversion Kit required to work with the Chris King ThreadFit 24 bottom bracket
Chris King ThreadFit 24 Steel
$154.00
Our ThreadFit 24 bottom bracket is designed and built to be durable, serviceable, and silent. Manufactured to create a precise and functional interface between your frame’s bottom bracket shell and your cranks to ensure that your cranks will spin lightly and without interference. We have developed a range of conversion kits that allow our ThreadFit 24 to be used with a wide selection of road and mountain bike cranks. - Engineered, manufactured and assembled in Portland, Oregon USA - 5-year built-to-last warranty - Legendary made-in-house bearings - Responsibly lightweight - Easily serviceable with our integrated grease injection system - Find your fit with our required conversion kits - Ceramic bearing upgrade available
Campagnolo Centaur Cartridge Bottom Bracket
$59.99 - $60.00
Features three sealed cartridge bearings. - Fits Daytona, Racing Triple, Centaur, Veloce and Mirage, 1193 and later Athena and pre-1995 Record and Chorus - 115mm spindle recommended for triple cranks and 32 or 35mm seat tubes - Unique taper is not compatible with Shimano - Weight: 233 grams
Campagnolo Chorus Cartridge Bottom Bracket
$90.00
Compatible only with Record or Chorus square taper cranks. Features three cartridge bearings and a chromoly steel spindle. - 3 sealed cartridge bearings, 2 on the drive side, 1 on the non-drive side - Removable cups are machined from 7000 series aluminum - Unique taper is not compatible with Shimano - Weight: 220 grams
Campagnolo Power-Torque Bottom Bracket Cups
$38.00
Campagnolo's Power-Torque Bottom Bracket Cups are perfect for your Campy Power-Torque crankset (sold separately). They are constructed from anodized aluminum for light weight and excellent durability. They are available in English and Italian thread. • Italian: 70mm • English: 68mm
Campagnolo Record Bottom Bracket Cups
$35.00
Campagnolo's Record Bottom Bracket Cups are perfect for your Campy Ultra-Torque crankset (sold separately). They are constructed from anodized aluminum for light weight and excellent durability. They are available in English and Italian thread. • Italian: 70mm • English: 68mm
Campagnolo Record Pista Bottom Bracket
$110.00
Campagnolo's Record Pista Bottom Bracket is a masterpiece of refinement thanks to its gossamer carbon/aluminum cartridge, easy-spinning bearings and lightweight aluminum cups.
Campagnolo Super Record Ultra-Torque Bottom Bracket Cups
$35.00
Campagnolo's Super Record Ultra-Torque Bottom Bracket Cups are perfect for your Campy Ultra-Torque crankset (sold separately). They are constructed from anodized aluminum for light weight and excellent durability. They are available in English and Italian thread. • Italian: 70mm • English: 68mm
Campagnolo Ultra-Torque Bottom Bracket Adapters
$34.99 - $55.00
- Adapters press directly into specific PF30, BB30, BB86 or BBright frames and allow the use of standard Ultra-Torque (UT) crank sets and EPS components - Updated design increases surface area contact with the frame's bottom bracket, reducing the possibility of noise from frames with slight imperfections - Ultra-Torque OS Fit BB-cup tool is required for adapter installation
Previous page Page 2 of 2