Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands

Parts & Accessories

No Image
$4.99
- Attaches to rear racks - Compatible with: Blinky 3,5,7 and Superflash - 25mm between each of the top horizontal holes (center to center) - Requires an "L bracket" that typically comes with a rear rack. If your rack is missing the L bracket, you can purchase Planet Bike's rack hardware pack
Planet Bike Tail Light Bracket
$5.00
- Fits seatpost (up to 31.8mm) or seatstay - Compatible with: Blinky 3,5,7, all Superflash lights and Blinky Safety rear light - Use with Blinky Safety Front light bracket to fit oversize (~31.8mm) handlebars
Paul Component Engineering Gino Light Mount
$29.50
- The Gino Light Mount is a small perch that allows lights to be mounted to any M5 threaded eyelet, rack mount or braze-on - Made in USA
Light & Motion Mini L 1.5 Smart Li-Ion Charger
$79.98
The Mini L 1.5 Smart Charger charges the 2-, 3-, and 6-cell lithium-ion batteries for the Seca and Stella lights (sold separately). Pick up an extra to top off your battery at the office. Also compatible with older 9-cell lithium-ion batteries.
Lezyne End Plug - Y10 KTV Drive F/R
$4.99
Replacement rubber end plug for the KTV Front, KTV Rear and KTV Pro Rear lights.
CatEye Rear Bracket
$6.99
Optional Accessory Rear rack Bracket for mounting most CatEye Taillights to rear racks with 50/80 mm spaced mounting holes.
Bontrager Transmitr MicroRemote
$36.99
A compact remote with ANT+ wireless technology that allows for easy, on-bar control of your bike lights. Bontrager Transmitr MicroRemote allows you to wirelessly control the functions of up to four Bontrager RT lights simultaneously. This sleek, compact remote communicates with your lights using ANT+ wireless technology, mounts easily to any handlebar, and can even be used in place of a bar end plug with an additional mount. Keep your light controls within reach! - Communicates via ANT+ wireless technology - Compatible with all Bontrager RT front and rear bike lights - Can be paired with up to four lights simultaneously - Wirelessly controls light functions, including on/off and mode selection, and signals battery status - Easily mounts to handlebars, and can be used as a bar end plug (Bar End Mount sold separately) - Double-press powers on all lights; single press changes modes - Flashing LED when powered on indicates low battery in one or more connected lights - Includes CR1632 battery, handlebar mount, and quick-start manual - Battery: CR1632 (Coin) - Weight: 12g
Ritchey Universal Stem Face Plate Accessory Mount: Supernova
$19.95
Free up bar space and secure your Supernova lights or most other stem-mounted accessories with our Ritchey Universal Stem Mount. Our unique mount means clutter- and hassle-free mounting of your favorite devices where they're easily viewed and operated. - Compatible with Ritchey C220 and 4-Axis 44 stem faceplates - Forged and machined alloy - Includes extended-length hardware
Problem Solvers Braze-on Light Mount
$19.99
Problem Solvers' Braze-on Light mount threads into your fork or fender eyelets, allowing you to mount lights or accessories. It's lower position is great for getting your light closer to the ground for better visibility.
Problem Solvers Front Rack Light Mount
$7.99
-Mounts easily to front racks with threaded M5 mounts -Allows for unobstructed light positioning -22.2mm clamping diameter
Portland Design Works Outpost Mount - Light Mount
$15.00
The PDW Outpost Mount allows you to attach a handlebar-mounted headlight to the side of your tapered wire basket—eliminating the problem of basket cargo blocking the light beam. The attachment plate compensates for the angle of a tapered wire basket, allowing the headlight to stay nice and level. - 32mm diameter clamping area for lights - Attaches with two M5 bolts and a steel backing plate - Mounts on left or right side
Portland Design Works StayPutNik Tail Light Bracket
$6.00
The Portland Design Works Stayputnik tail light bracket has a UV-proof rubber strap to securely hold your tail light on nearly any size seat post. - Mounts in seconds and is compatible with every Portland Design Works tail light except Asteroid and Fenderbot. - UV proof rubber strap - Compatible with every PDW tail light except Asteroid and Fenderbot
Portland Design Works Tail Light Rack Bracket
$6.00
Mount your tail light to the reflector tab on the back of a rear cargo rack with this Rack Bracket from Portland Design Works. - Compatible with all PDW rear lights except the Asteroid and Fenderbot - Horizontal holes are 50mm apart to fit European rack standards - Vertical holes are 18mm apart to fit most reflector mounts
Planet Bike Aero Mount Tail Light Bracket
$6.99
- Compatible with Blinky 3,5,7, Superflashes, Turbo, Turbo Minis Superflash Micros and Blinky Safety rear light - Designed specifically for aero seat posts - Adjustable light angle - Easy on/easy off design makes for quick mounting and removal
Planet Bike BRT Strap Light
$14.99
Planet Bike's BRT Strap is a small item that provides big visibility. This versatile LED safety band can be used as an arm band, pants keeper, dog collar and anything else you can think of. An included lithium battery provides over 200 hours of run time in either flashing or steady mode.
Paul Component Engineering Stem Cap Light Mount
$52.50
- A great way to mount a light, computer, power meter or GPS unit in the center of a threadless stem - Made in the USA - Material: 6061 Aluminum - Weight: 24g - Outside Diameter: 26.0mm - Stem Size: Threadless 1-1/8"
Minoura SGS-400-OS Clamp
$18.99
Keep your handlebar organized and your devices secure with the SGS-400-OS (27.2/31.8/35.0mm) from Minoura. - Holds up to 2 accessories (light, computer, mp3, bottle cage holder, etc.) - Lightweight and rustproof alloy construction - New LW-Clamp reduces weight 25 grams compared to previous models - Aluminum bar is position adjustable and uses Hex Bolt to install and remove - 27mm-35mm diameter
Minoura SGS-400-STD Clamp
$18.99
Keep your handlebar organized and your devices secure with the SGS-400-STD (22.2/25.4/28.6mm) from Minoura. - Holds up to 2 accessories (light, computer, mp3, bottle cage holder, etc.) - Lightweight and rustproof alloy construction - New LW-Clamp reduces weight 25 grams compared to previous models - Aluminum bar is position adjustable and uses Hex Bolt to install and remove - 22mm-29mm diameter
Light & Motion 11.1v 3-cell Li-ion Battery
$99.99
Light & Motion's 11.1v 3-cell Li-ion Battery is nice and small and it's lithium-ion technology means impressive run times, while its gossamer weight of only 180 grams means it's easy to carry in a pocket or packs. It also comes with a convenient mounting strap.
Light & Motion 11.1v 6-cell Li-ion Battery
$149.99
Light & Motion's 11.1v 6-cell Li-ion Battery packs enough juice to illuminate all your epic adventures. Its hook-and-loop strap and small size make it easy to mount to the stem or frame. Plus, it conveniently fits in pockets and packs, too.
Light & Motion 2.0A USB AC Adapter
$29.99
Use Light & Motion's 2.0A USB AC Adapter to charge your light with a USB cable, using a standard wall outlet. - Compatible with: Urban, Vis, Solite, Taz, GoBe
Light & Motion 7.4v 2-cell Li-ion Battery
$59.99
Light & Motion's 7.4v 2-cell Li-ion Battery is compact and lightweight to power your light without weighing you down. It slips into a jersey pocket or pack or attaches to your bike via the convenient integrated rubber strap.
Light & Motion Helmet Mount for Seca, Vega, and Stella
$12.99
This mount is designed to securely attach your Light and Motion Seca, Vega, or Stella headlight (sold separately) to your helmet. With a helmet mount, the light is always pointing where you're looking.
Light & Motion Imjin and Nip GoPro Mount
$9.99
Set up a light wherever you can connect a GoPro mount. Use this adapter to connect your Imjin or Nip to any GoPro mounting option.
Light & Motion Nip Bosch Bar Mount
$29.99
Seamlessly mount your Nip e-Bike light to the underside of the Bosch computer module. - Compatible with Nip e-Bike Headlights
Light & Motion Nip Fender Mount
$29.99
The Nip fender mount is a clean, simple solution to mount the Nip e-Bike headlight above the wheel. This lower position is great for commuting in foggy/rainy conditions or if you simply want fewer mounts on your handlebar. - Compatible with Nip e-Bike headlights
Light & Motion Pro-Max Adaptor
$9.99
Mount the Nip light to an e-Bike that has the specialty Pro Max stem for accessories.
Light & Motion Sport Head Strap
$39.99
Take your Light & Motion headlight off your handlebars and along with you wherever the path may lead. Soft fabric and full adjustable sizing make for a comfortable fit.
Light & Motion Taz GoPro Mount
$9.99
Setup a light wherever you can connect a GoPro mount. Use this adapter to connect your Taz to any GoPro mounting option.
Light & Motion Taz Replacement Mount
$15.99
Direct replacement for the mount on Taz lights. The simple but thoughtfully designed system cinches light to the bar to prevent movement in bumpy terrain. - Two different rubber mount pads included to achieve the perfect fit depending if the handlebar is standard or oversize - Includes strap and mounting hardware
Page 1 of 3 Next page